Mumble is a fantastic open-source voice chat platform known for its reliability and ease of use.
And Lokinet is a cutting-edge onion routing network that offers unparalleled security and anonymity potential.
Well what if you could run a Mumble server over Lokinet, combining Mumble’s ease of use with Lokinet’s security and anonymity to create the ultimate secure voice chat service? In this article, we’re going to cover how to do exactly that — with just 15 minutes of your time and $3 a month, you and your organisation can create one of the most secure voice chat platforms possible.
A Mumble server running over Lokinet on a server you control gives you absolute certainty that your voice conversations, associated metadata, and other Mumble activity cannot be stored or recorded, because no computer ever knows who is talking to whom — not even the Mumble server itself. So long as you trust the device that you run the Mumble server on (which you can, because it’s yours), you can be certain that no one else on earth can eavesdrop on your conversation — or even know that you’re connected to the server at all.
If this is your first time using SSH and Linux stuff, don’t stress. We’ll walk you through every step! With that, let’s get to it.
Step 1: Rent a VPS
The first thing you’ll want to do is rent yourself a VPS (Virtual Private Server) to host your Mumble voice chat server. You could run the Mumble server from your own computer instead, but if you want the server to stay up 24/7, without having to leave your own PC on all the time, a VPS is the way to go. Mumble’s chat server has extremely low system requirements, so a VPS with any amount of storage and at least 512MB RAM will do the trick — you can find VPSs that meet these requirements for around US$3 a month.
Step 2: Prepare your VPS
Once you have access to your new VPS, you’re almost ready to install Lokinet, but there’s a little bit of preparatory work to do first. Start by opening a command prompt on your local machine (Terminal on macOS, any command prompt on Linux, or PowerShell on Windows 10). SSH into your VPS with this command:
ssh [email protected][VPS IP address]
Replacing [VPS IP address] with the IP of your VPS. It’ll prompt you for a password which will usually be provided to you by the VPS host. More advanced users can and should disable root password access and instead use SSH keys, but if that sounds hard, don’t worry about it for now. As you learn more about Linux, you’ll get more familiar with these best practices.
Once you’ve logged in, we’re ready to roll. First, we’ll update our package lists to make sure our VPS sees the most recent versions of all available packages. Type:
sudo apt update
You’ll see a bunch of package lists being downloaded. Once this command completes, run the following command to upgrade any outdated packages currently installed on the VPS:
sudo apt upgrade
We’ll also need to make sure the curl command is installed before we proceed. Run this command:
It should output the location of your installed curl command. If you get an error, install curl:
sudo apt install curl
Then run which curl again to make sure curl is installed.
Success? Congrats, you’re ready to move on to the next step:
Step 3: Install Lokinet
To install Lokinet, we need to add the Lokinet repository. Run the following command to install the public key used by the Lokinet dev team to sign Lokinet binaries:
curl -s https://deb.imaginary.stream/public.gpg | sudo apt-key add -
Then run the following command to tell apt where to find the Lokinet packages:
echo "deb https://deb.imaginary.stream $(lsb_release -sc) main" | sudo tee /etc/apt/sources.list.d/imaginary.stream.list
Next, update your repository package lists again with:
sudo apt update
And now, install Lokinet:
sudo apt install lokinet
Congrats, Lokinet is now installed and running in the background. We’re nearly there.
Step 4: Installing the Mumble server
Run this command:
sudo apt install mumble-server
That’s it. The Mumble server is now installed. On to Step 5:
Step 5: Setting up a persistent keyfile
This step is a bit more involved. We need to set up Lokinet to always generate a keyfile in the same directory, so it will work consistently. Linux servers don’t have a graphical interface, but they do ship with some in-terminal text editors. We need to edit a file now, so start by opening your lokinet.ini file with this command:
sudo nano /etc/loki/lokinet.ini
Using the arrow keys, move the cursor down to the [network] section of the file. Remove the # from before the “keyfile=” line, then add the following after the = symbol:
Then hit Ctrl+X. Type “Y” (for yes) when asked if you want to save your changes, then press Enter to save and exit.
Now that you’ve exited nano, you’re back in the terminal. Restart Lokinet to generate a keyfile for Mumble:
sudo systemctl restart lokinet
Step 6: Binding the Mumble server to Lokinet
Now we need to make sure your Mumble server is using Lokinet for all traffic. Start with this command to grab the IP address we need to bind Mumble to:
dig @127.3.2.1 +short localhost.loki
This command will output 2 strings of text: a long string of random letters and numbers ending in .loki, and an IP address (a number in the format xxx.xx(x).x.x).
Select and copy (Ctrl+C on Windows or Linux; Cmd+C on macOS) the IP address. Some SSH clients allow you to copy by highlighting the text and right-clicking on it as well.
Now, we need to point the Mumble server to that IP address. Use this command to open the configuration file for the Mumble server:
Using the arrow keys, navigate down to the line “;host=” under the section Specific IP or hostname to bind to. Delete the ; from the start of the line, then paste the IP address we copied earlier after the = symbol. Hit Ctrl+X to exit. Type “Y” when asked if you want to save your changes, then press Enter to save and exit.
Back at the command line, restart the Mumble server to apply changes:
systemctl restart mumble-server
Step 7: Done!
Congrats! A Mumble server is now up and running on your VPS, and all its traffic is being routed through Lokinet. All that’s left is to grab the Lokinet address of the Mumble server and give it to anyone you want to be able to connect. In case you missed it, run this command to find the Lokinet address of the Mumble server:
dig @127.3.2.1 +short localhost.loki
This is the same command we ran earlier, but this time, pay attention to the long string of characters ending in .loki (be sure to include the .loki part). This is the Lokinet address of your secure, onion-routed Mumble server.
Copy this address and provide it to anyone you want to be able to connect to the server — all they have to do is paste the address into the Address field of the Add Server dialog in the Mumble client, add a username and label to identify the server, hit OK, and connect!
Mumble can be downloaded for free on all major platforms. Anyone that wants to access your secret Mumble server will also need to have Lokinet installed and running. To download and install Lokinet, just head to https://lokinet.org/. Further Lokinet guides can be found at https://docs.loki.network/Lokinet/LokinetOverview/.
And that’s it! Only 15 minutes and $3 later, you can now have completely surveillance-free conversations over the internet. We hope to integrate voice features into Session to make it even easier to access secure voice channels with this level of privacy and security.
In the meantime, though, this Mumble/Lokinet setup is perhaps the most secure voice channel option available. This unique combination of services is just one example of the power of the Oxen tech stack — stay tuned for more guides and articles about what Oxen’s tech can do.